1.27 mm (0.050″) UL2651 Ribbon Cable in Bulk

Order unterminated cable by the roll for your own cutting and assembly. Choose grey cable with a red edge or rainbow cable, then match the conductor count and wire gauge to a drawing row.

Minimum order: 1 roll. Length per roll depends on the selected row.

Grey flat ribbon cable with a red stripe along one edge

Compare grey and rainbow roll specifications

Two 20-conductor, 28 AWG cables can have the same nominal width and different roll lengths. Drawing 23 lists 250 ft (76.2 m) for the grey version. Drawing 11 lists 200 ft (61 m) for the rainbow version.

Selected rows from the source drawings. Open a sheet for the full range. On a small screen, scroll across to the drawing and quote links.

IdentificationConductorsAWGStrands / diameter (mm)Cable widthLength per rollSourceInquiry
Grey / red edge4307/0.105.08 ± 0.3 mm1000 ft / 305 mDrawing 30 ↗
Grey / red edge20307/0.1025.4 ± 0.3 mm250 ft / 76.2 mDrawing 30 ↗
Grey / red edge34307/0.1043.18 ± 0.4 mm250 ft / 76.2 mDrawing 30 ↗
Grey / red edge20287/0.12725.4 ± 0.3 mm250 ft / 76.2 mDrawing 23 ↗
Grey / red edge2267/0.162.54 ± 0.3 mm2000 ft / 610 mDrawing 23 ↗
Rainbow6287/0.1277.62 ± 0.3 mm1000 ft / 305 mDrawing 11 ↗
Rainbow20287/0.12725.4 ± 0.3 mm200 ft / 61 mDrawing 11 ↗
Rainbow10267/0.1612.7 ± 0.3 mm1000 ft / 305 mDrawing 15 ↗
Rainbow50267/0.1663.5 ± 0.4 mm200 ft / 61 mDrawing 15 ↗

Other conductor counts are listed on the full sheets. Find your drawing in the buying FAQ ↓ or browse all cable drawings.

Bulk ribbon cable FAQ

Which drawing covers my conductor count?

For grey cable, drawing 30 lists 30 AWG sizes up to 34 conductors. Drawing 23 continues at 40, 50, 60 and 64 conductors and includes the 28 and 26 AWG tables. For rainbow cable, start with drawing 11 for 28 AWG. Drawing 15 lists the larger 28 AWG counts and the 26 AWG table.

Can I substitute rainbow cable for grey at the same pitch?

Check the connector’s cable requirements and the conductor identification used on your assembly drawing. The 20-conductor, 28 AWG examples both use seven 0.127 mm strands per conductor and measure 25.4 ± 0.3 mm wide. The grey row gives T as 0.90 ± 0.05 mm. The rainbow row gives OD as 0.95 ± 0.05 mm. Compare those dimensions with the permitted cable profile before approving a substitution. Check cable and connector pitch.

Can I get a continuous 65 m cut from one roll?

The 61 m rainbow roll in drawing 11 is shorter than the required cut. The 76.2 m grey roll in drawing 23 has enough nominal length. If its construction suits your assembly, request confirmation of at least 65 m of uninterrupted, usable cable on a single roll and state any splice restrictions.

What should I send to match an existing roll?

Send the reel label or cable marking, conductor count, gauge and a photo showing the cable edge at the connector’s pin 1 mark. Drawing 30 shows a red edge on grey cable. Drawing 11 shows a brown-to-black rainbow sequence and specifies no printing. Include the color sequence your operators use and identify any features that must match.

What should I include in a bulk quote request?

Choose “Quote this row” to include the drawing and dimensions. Add the roll count, delivery destination, required date and any packing requirements. For example: “Please quote four rolls of drawing 30, grey with a red edge, 30 AWG, 20 conductors, 250 ft per roll. Please confirm availability and lead time.”

Request pricing for your 1.27 mm ribbon cable

If your conductor count or roll length is missing from the table, send the required construction and quantity for review.

Open the specification worksheet